CHICAGO PNEUMATIC
- CP 100 / RX 2
- CP 100 H / CP 75 H / CP 80 H
- CP 110 H
- CP 150 / RX 3
- CP 200 / RX 4
- CP 180 H
- CP 300 / RX 6
- CP 250 H1
- CP 290 H
- CP 400 / CP 550 / RX 8 / RX 11
- CP 400 H
- CP 750
- CP 600 H / CP 700 H / CP 900 H
- CP 1150
- RX 18
- CP 1400 H / CP 1550
- CP 1650
- CP 1800 H / CP 2000 H
- RX 25 / RX 26
- CP 2250 / RX 29 / RX 30
- RX 38
- CP 3050 / RX 45 / RX 46
- CP 4250 / RX 53 / RX 54
CP 100 / RX 2
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 100 / RX
2.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC PB110, EC 40T, CP100/RX2) / 410
L.410 |
860027 | 4.00 | On request | €123.20 |
|
|
Flat chisel (AC PB110, EC 40T, CP100/RX2) / 42x410
Cross - W.42xL.410 |
860028 | 4.00 | On request | €123.20 |
|
|
Wide chisel (AC PB110, EC 40T, CP100/RX2) / 120x370
Cross - W.120xL.370 |
860029 | 4.00 | On request | €169.40 |
|
|
Asphalt cutter (AC PB110, EC 40T, CP100/RX2) / 100x380
Parallel - W.100xL.380 |
860030 | 4.00 | On request | €169.40 |
|
|
Bull point (AC PB110, EC 40T, CP100/RX2) / 500
L.500 |
860031 | 5.00 | On request | €156.20 |
|
CP 100 H / CP 75 H / CP 80 H
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 100H / 75H / 80H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC Epiroc SB100/SBC115, KM100, CP100H) / 550
L.550 |
860703 | 7.00 | On request | €187.00 |
|
|
Bull point (AC Epiroc SB100/SBC115, KM100, CP100H) / 700
L.700 |
860704 | 8.00 | On request | €228.80 |
|
|
Flat chisel (AC Epiroc SB100/SBC115, KM100, CP100H) / 45x550
Cross - W.45xL.550 |
860711 | 7.00 | On request | €187.00 |
|
|
Wide chisel (AC Epiroc SB100/SBC115, KM100, CP100H) / 120x510
Cross - W.120xL.510 |
860714 | 7.00 | On request | €268.40 |
|
|
Asphalt cutter (AC Epiroc SB100/SBC115, KM100, CP100H) / 125x480
Parallel - W.125xL.480 |
860715 | 7.00 | On request | €268.40 |
|
CP 110 H
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 110 H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 510
L.510 |
860706 | 7.00 | On request | €187.00 |
|
|
Bull point (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 750
L.750 |
860698 | 11.00 | On request | €266.20 |
|
|
Flat chisel (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 50x150
Cross - W.50xL.510 |
860707 | 7.00 | On request | €187.00 |
|
|
Wide chisel (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 125x480
Cross - W.125xL.480 |
860708 | 7.00 | On request | €264.00 |
|
|
Asphalt cutter (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 115x490
Parallel - W.115xL.490 |
860054 | 7.00 | On request | €264.00 |
|
|
Wide chisel (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 125x700
Cross - W.125 x L.700 |
860697 | 11.00 | On request | €616.00 |
|
CP 150 / RX 3
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 150 / RX 3.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Asphalt cutter (AC EC50T/PB160/AT70, CP150/RX3) / 115x510
Parallel - W.115xL.510 |
860035 | 8.00 | On request | €316.80 |
|
|
Wide chisel (AC EC50T/PB160/AT70, CP150/RX3) / 140x500
Quer - B.140xL.500 |
860034 | 8.00 | On request | €316.80 |
|
|
Flat chisel (AC EC50T/PB160/AT70, CP150/RX3) / 52x530
Cross - W.52xL.530 |
860033 | 8.00 | On request | €226.60 |
|
|
Bull point (AC EC50T/PB160/AT70, CP150/RX3) / 530
L.530 |
860032 | 8.00 | On request | €226.60 |
|
|
Bull point (AC EC50T/PB160/AT70, CP150/RX3) / 680
L.680 |
860041 | 11.00 | On request | €294.80 |
|
CP 200 / RX 4
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 200 / RX 4.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Asphalt cutter (AC PB210/AT210, EC 60T, CP200/RX4)
W.130xL.570 |
860040 | 12.00 | On request | €437.80 |
|
|
Wide chisel (AC PB210/AT210, EC 60T, CP200/RX4)
W.150xL.550 |
860039 | 12.00 | On request | €437.80 |
|
|
Flat chisel (AC PB210/AT210, EC 60T, CP200/RX4)
W.62xL.600 |
860038 | 12.00 | On request | €325.60 |
|
|
Bull point (AC PB210/AT210, EC 60T, CP200/RX4)
L.600 |
860037 | 12.00 | On request | €325.60 |
|
|
Bull point (AC PB210/AT210, EC 60T, CP200/RX4)
L.750 |
860046 | 17.00 | On request | €424.60 |
|
CP 180 H
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 180 H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC SB200, CP180H, JCB HM265Q, KM200/205) / 600
L.600 |
860712 | 13.00 | On request | €341.00 |
|
|
Bull point (AC SB200, CP180H, JCB HM265Q, KM200/205) / 800
L.800 |
860762 | 19.00 | On request | €464.20 |
|
|
Flat chisel (AC SB200, CP180H, JCB HM265Q, KM200/205) / 65x600
Cross - W.65xL.600 |
860713 | 13.00 | On request | €341.00 |
|
|
Flat chisel (AC SB200, CP180H, JCB HM265Q, KM200/205) / 65x800
Cross - W.65xL.800 |
860743 | 19.00 | On request | €464.20 |
|
|
Wide chisel (AC SB200, CP180H, JCB HM265Q, KM200/205) / 125x650
Cross - W.125xL.650 |
860716 | 16.00 | On request | €510.40 |
|
|
Asphalt cutter (AC SB200, CP180H, JCB HM265Q, KM200/205) / 130x670
Parallel - W.130xL.670 |
860763 | 16.00 | On request | €510.40 |
|
CP 300 / RX 6
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 300 / RX 6.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC PB310/AT170, EC 70T, CP300/RX6)
L.740 |
860042 | 20.00 | On request | €433.40 |
|
|
Flat chisel (AC PB310/AT170, EC 70T, CP300/RX6)
W.70xL.740 |
860043 | 20.00 | On request | €433.40 |
|
|
Wide chisel (AC PB310/AT170, EC 70T, CP300/RX6)
W.150xL.690 |
860044 | 20.00 | On request | €572.00 |
|
|
Asphalt cutter (AC PB310/AT170, EC 70T, CP300/RX6)
W.150xL.720 |
860045 | 20.00 | On request | €572.00 |
|
CP 250 H1
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 250 H1.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (ATLAS COPCO TEX250H / CP250 H1)
L.800 |
860055 | 27.00 | On request | €596.20 |
|
|
Flat chisel (ATLAS COPCO TEX250H / CP250 H1)
W.80xL.800 |
860056 | 27.00 | On request | €596.20 |
|
|
Wide chisel (Atlas Copco TEX 250H / CP250 H1)
W.160xL.770 |
860067 | 27.00 | On request | €833.80 |
|
|
Asphalt cutter (Atlas Copco TEX 250H / CP250 H1)
W.180xL.790 |
860368 | 27.00 | On request | €833.80 |
|
CP 290 H
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 290 H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC/Epiroc SB300 / CP290H / JCB HM385Q / KM300) / 800
L.800 |
860701 | 28.00 | On request | €591.80 |
|
|
Flat chisel (AC/Epiroc SB300 / CP290H / JCB HM385Q / KM300) / 80x800
Cross - W.80xL.800 |
860710 | 28.00 | On request | €591.80 |
|
|
Asphalt cutter (AC SB300 / CP290H / JCB HM385Q / KM300) / 180x790
Parallel - W.180xL.790 |
860764 | 28.00 | On request | €814.00 |
|
|
Wide chisel (AC SB300 / CP290H / JCB HM385Q / KM300) / 160x770
Cross - W.160xL.770 |
860709 | 28.00 | On request | €814.00 |
|
|
Bull point (AC/Epiroc SB300 / CP290H / JCB HM385Q / Kubota KM300) / 1000
L.1000 |
864129 | 37.00 | On request | €1,474.45 |
|
CP 400 / CP 550 / RX 8 / RX 11
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 400 / 550 / RX 8 / 11.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Asphalt cutter (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 150x790
Parallel - W.150xL.790 |
860050 | 29.00 | On request | €761.20 |
|
|
Wide chisel (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 160x760
Cross - W.160xL.760 |
860049 | 29.00 | On request | €761.20 |
|
|
Flat chisel (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 80x800
Cross - W.80xL.800 |
860048 | 29.00 | On request | €576.40 |
|
|
Bull point (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 800
L.800 |
860047 | 29.00 | On request | €576.40 |
|
CP 400 H
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 400 H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 840
L.840 |
860057 | 41.00 | On request | €778.80 |
|
|
Flat chisel (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 95x840
Cross - W.95xL.840 |
860058 | 41.00 | On request | €778.80 |
|
|
Wide chisel (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 180x800
Cross - W.180xL.800 |
860068 | 41.00 | On request | €1,203.40 |
|
|
Asphalt cutter (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 200x830
Parallel - W.200xL.830 mm |
860074 | 41.00 | On request | €1,203.40 |
|
|
Bull point (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 1200
L.1200 |
864130 | 60.00 | On request | €2,246.20 |
|
CP 750
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 750.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB700/800, CP750, HM580, HM860Q) / 1000
L.1000 |
860005 | 56.00 | On request | €976.80 |
|
|
Flat chisel (AC MB700/800, CP750, HM580, HM860Q) / 100x1000
Cross - W.100xL.1000 |
860006 | 56.00 | On request | €976.80 |
|
|
Wide chisel (AC MB700/800, CP750, HM580, HM860Q) / 200x950
Cross - W.200xL.950 |
860007 | 56.00 | On request | €1,421.20 |
|
|
Blunt tool (AC MB700/800, CP750, HM580, HM863Q) / 930
L.930 |
860008 | 56.00 | On request | €954.80 |
|
CP 600 H / CP 700 H / CP 900 H
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 600 H / CP 700 H / CP 900 H.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HBC1100/1700HD/TEX600-900H / CP600-900H) / 900
L.900 |
860059 | 54.00 | On request | €1,031.80 |
|
|
Flat chisel (AC HBC1100/1700HD/TEX600-900H / CP600-900H) / 105x900
Cross - W.105xL.900 |
860060 | 54.00 | On request | €1,031.80 |
|
CP 1150
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 1150.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (KRUPP HM710/720CS/V, CP1150, JCB HM1260Q) / 1060
L.1060mm |
860502 | 76.00 | On request | €1,469.60 |
|
|
Wide chisel (KRUPP HM710/720CS/V, CP1150, JCB HM1260Q) / 240x1000
Cross - W.240xL.1000 |
860503 | 76.00 | On request | €2,136.20 |
|
|
Flat chisel (KRUPP HM710/720CS/V, CP1150, JCB HM1260Q) / 115x1060
Cross - W.115xL.1060mm |
860504 | 76.00 | On request | €1,469.60 |
|
|
Blunt tool (KRUPP HM710/720CS/V, CP1150, JCB HM1260Q) / 980
L.980mm |
860505 | 76.00 | On request | €1,456.40 |
|
RX 18
Chisels for hydraulic hammer CHICAGO PNEUMATIC RX 18.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB1200, SB1102, HM780, CP RX18) / 1100
L.1100 |
860012 | 87.00 | On request | €1,570.80 |
|
|
Flat chisel (AC MB1200, SB1102, HM780, CP RX18) / 120x1100
Cross - W.120xL.1100 |
860013 | 87.00 | On request | €1,570.80 |
|
|
Blunt tool (AC MB1200, SB1102, HM780, CP RX18) / 1020
L.1020 |
860014 | 87.00 | On request | €1,533.40 |
|
CP 1400 H / CP 1550
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 1400 H / CP 1550.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HBC 2500/TEX 1400H, CP 1400H/1550) / 1100
L.1100 |
860061 | 95.00 | On request | €1,852.40 |
|
|
Flat chisel (AC HBC 2500/TEX 1400H, CP 1400H/1550) / 125x1100
Cross - W.125xL.1100 |
860062 | 95.00 | On request | €1,852.40 |
|
|
Blunt tool (AC HBC 2500/TEX 1400H, CP 1400H/1550)
L.1020 |
860063 | 95.00 | On request | €1,189.32 |
|
CP 1650
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 1650.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB1600, KRUPP HM950, JCB HM1560Q, CP1650) / 1100
L.1100 |
860015 | 107.00 | On request | €1,898.60 |
|
|
Flat chisel (MB1600, HM950, JCB HM1560Q, CP1650) / 135x1100
Cross - W.135xL.1100 |
860016 | 107.00 | On request | €1,898.60 |
|
|
Blunt tool (MB1600, HM950, JCB HM1560Q, CP1650) / 1000
L.1000 |
860017 | 107.00 | On request | €1,850.20 |
|
|
Percussion buster (MB1600, HM950, JCB HM1560Q, CP1650) / 1200
L.1200 |
860305 | 107.00 | On request | €2,230.80 |
|
CP 1800 H / CP 2000 H
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 1800 H / CP 2000 H.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HBC 4000 / TEX, CP 1800H/2000H) / 1100
L.1100 |
860064 | 108.00 | On request | €2,008.60 |
|
|
Flat chisel (AC HBC 4000 / TEX, CP 1800H/2000H) / 135x1100
Cross - W.135xL.1100 |
860065 | 108.00 | On request | €1,320.34 |
|
|
Blunt tool (AC HBC 4000 / TEX, CP 1800H/2000H) / 1000
L.1000 |
860066 | 108.00 | On request | €1,962.40 |
|
RX 25 / RX 26
Chisels for hydraulic hammer CHICAGO PNEUMATIC RX 25 / RX 26.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC MB1700/EC140T, HM1000, CP RX25/26, JCB HM1760Q) / 140x1200
Cross - W.140xL.1200 |
860019 | 128.00 | On request | €2,279.20 |
|
|
Bull point (AC MB1700/EC140T, HM1000, CP RX25/26, JCB HM1760Q) / 1200
L.1200 |
860018 | 128.00 | On request | €2,279.20 |
|
|
Blunt tool (AC MB1700/EC140T, HM1000, CP RX25/26, JCB HM1760Q) / 1100
L.1100 |
860020 | 128.00 | On request | €2,219.80 |
|
CP 2250 / RX 29 / RX 30
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 2250 / RX 29 / RX 30.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC HB2200/EC 150T, HM1300, JCB HM2460Q) / 150x1300
Cross - W.150xL.1300 |
860022 | 160.00 | On request | €2,890.80 |
|
|
Bull point (AC HB2200/EC 150T, HM1300, JCB HM2460Q) / 1300
L.1300 |
860021 | 160.00 | On request | €2,890.80 |
|
|
Blunt tool (AC HB2200/EC 150T, HM1300, JCB HM2460Q) / 1200
L.1200 |
860023 | 160.00 | On request | €2,820.40 |
|
RX 38
Chisels for hydraulic hammer CHICAGO PNEUMATIC RX 38.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HB2500/EC155T, CP RX38) / 1300
L.1300 |
860365 | 175.00 | On request | €3,495.80 |
|
|
Blunt tool (AC HB2500/EC155T, CP RX38) / 1200
L.1200 |
860367 | 175.00 | On request | €3,410.00 |
|
|
Flat chisel (AC HB2500/EC155T, CP RX38) / 155x1300
Cross - W.155xL.1300 |
860366 | 175.00 | On request | €3,495.80 |
|
CP 3050 / RX 45 / RX 46
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 3050 / RX 45 / RX 46.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC HB3000/3100, HM2100, JCB HM3060Q) / 165x1350
Cross - W.165xL.1350 |
860025 | 197.00 | On request | €4,602.40 |
|
|
Bull point (AC HB3000/3100, HM2100, JCB HM3060Q) / 1350
L.1350 |
860024 | 197.00 | On request | €4,602.40 |
|
|
Blunt tool (AC HB3000/3100, HM2100, JCB HM3060Q) / 1250
L.1250 |
860026 | 197.00 | On request | €4,488.00 |
|
CP 4250 / RX 53 / RX 54
Chisels for hydraulic hammer CHICAGO PNEUMATIC CP 4250 / RX 53 / RX 54.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HB4100/4200/EC180T, HM2200, JCB HM4160Q) / 1700
L.1700 |
860325 | 308.00 | On request | €6,056.60 |
|
|
Flat chisel (AC HB4100/4200/EC180T, HM2200, JCB HM4160Q) / 180x1700
Cross - W.180xL.1700 |
860326 | 308.00 | On request | €6,056.60 |
|
|
Blunt tool (AC HB4100/4200/EC180T, HM2200, JCB HM4160Q) / 1600
L.1600 |
860327 | 308.00 | On request | €5,904.80 |
|