ATLAS COPCO
Chisels for Hydraulic Hammer ATLAS COPCO. Choose from Series + Type below:
- SB 50 / SBC 60 / TEX 30 H
- SB 52 / SB 55
- SB 102 / SB 100 MK2
- SB 100 / 110 / SBC 115 / TEX 75 / 80 / 100 H
- SB 150 / 150 MK2 / 152 / SBC 255 / SBU 160 / TEX 110 H
- SB 200 / 202 / SBC 410 / SBU 220 / TEX 180 H
- SB 300 / 302 / SBC 610 / 650 / SBU 340
- SB 450 / 452 / SBC 800 / 850 / TEX 400H
- SB 552
- SB 702
- SB 1102
- MB 500
- MB 700 / MB 800
- MB 750
- MB 1000
- MB 1200
- MB 1500
- MB 1600
- MB 1650
- MB 1700
- HB 2000
- HB 2200
- HB 2500
- HB 3000 / HB 3100
- HB 3600
- HB 4100 / HB 4200
- TEX 250 H
- HBC 1100 / 1700HD / TEX 600-900H
- HBC 2500 / TEX 1400H
- HBC 4000 / TEX 1800 / 2000H
- PB 110 / AT 20
- PB 160 / AT 70
- PB 210 / AT 120
- PB 310 / AT 170
- PB 420 / 530 / AT 220
- EC 40 T
- EC 50 T
- EC 60 T
- EC 70 T
- EC 80 T
- EC 100 T
- EC 135 T
- EC 140 T
- EC 150 T
- EC 155 T
- EC 165 T
- EC 180 T
SB 50 / SBC 60 / TEX 30 H
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 50 / SBC 60 / TEX 30 H.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC SB 50/SBC 60/TEX 30H) / 410
L.410 |
860051 | 3.00 | On request | €176.00 |
|
|
Flat chisel (AC SB 50/SBC 60/TEX 30H) / 32x400
Cross - W.32xL.400 |
860052 | 3.00 | On request | €176.00 |
|
|
Asphalt cutter (AC SB 50/SBC 60/TEX 30H) / 100x410
Parallel - W.100xL.410 |
860053 | 5.00 | On request | €224.40 |
|
SB 52 / SB 55
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 52 / SB 55.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC/Epiroc SB52/55, KM55) / 42x420
Cross - W.42xL.420 |
860301 | 4.00 | On request | €143.00 |
|
|
Bull point (AC/Epiroc SB52/55, KM55) / 420
L.420 |
860300 | 4.00 | On request | €143.00 |
|
|
Wide chisel (AC/Epiroc SB52/55, KM55) / 120x370
Cross - W.120xL.370 |
860302 | 5.00 | On request | €209.00 |
|
|
Asphalt cutter (AC/Epiroc SB52/55, KM55) / 100x400
Parallel - W.100xL.400 |
860303 | 5.00 | On request | €209.00 |
|
|
Tamping tool (AC/Epiroc SB52/55, KM55) / 400
W.200x200/L.400 |
860304 | 16.00 | On request | €475.20 |
|
|
Bull point (AC/Epiroc SB52/55, KM55) / 700
L.700 |
860306 | 7.00 | On request | €228.80 |
|
SB 102 / SB 100 MK2
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 102 / SB 100 MK2.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC/EPIROC SB102/100MK2, KM105) / 45x450
Cross - W.45xL.450 |
860767 | 5.00 | On request | €154.00 |
|
|
Bull point (AC/EPIROC SB102/100MK2, KM105) / 450
L.450 |
860766 | 5.00 | On request | €154.00 |
|
|
Wide chisel (AC/EPIROC SB102/100MK2, KM105) / 120x410
Cross - W.120xL.410 |
860768 | 5.00 | On request | €206.80 |
|
|
Asphalt cutter (AC/EPIROC SB102/100MK2, KM105) / 100x420
Parallel - W.100xL.420 |
860769 | 5.00 | On request | €206.80 |
|
|
Bull point (AC/EPIROC SB102/100MK2, KM105) / 580
L.580 |
860744 | 7.00 | On request | €182.60 |
|
SB 100 / 110 / SBC 115 / TEX 75 / 80 / 100 H
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 100 / 110 / SBC 115 / TEX 75 / 80 / 100 H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC Epiroc SB100/SBC115, KM100, CP100H) / 550
L.550 |
860703 | 7.00 | On request | €187.00 |
|
|
Bull point (AC Epiroc SB100/SBC115, KM100, CP100H) / 700
L.700 |
860704 | 8.00 | On request | €228.80 |
|
|
Flat chisel (AC Epiroc SB100/SBC115, KM100, CP100H) / 45x550
Cross - W.45xL.550 |
860711 | 7.00 | On request | €187.00 |
|
|
Wide chisel (AC Epiroc SB100/SBC115, KM100, CP100H) / 120x510
Cross - W.120xL.510 |
860714 | 7.00 | On request | €268.40 |
|
|
Asphalt cutter (AC Epiroc SB100/SBC115, KM100, CP100H) / 125x480
Parallel - W.125xL.480 |
860715 | 7.00 | On request | €268.40 |
|
SB 150 / 150 MK2 / 152 / SBC 255 / SBU 160 / TEX 110 H
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 150 / 150 MK2 / 152 / SBC 255 / SBU 160 / TEX 110 H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 510
L.510 |
860706 | 7.00 | On request | €187.00 |
|
|
Bull point (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 750
L.750 |
860698 | 11.00 | On request | €266.20 |
|
|
Flat chisel (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 50x150
Cross - W.50xL.510 |
860707 | 7.00 | On request | €187.00 |
|
|
Wide chisel (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 125x480
Cross - W.125xL.480 |
860708 | 7.00 | On request | €264.00 |
|
|
Asphalt cutter (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 115x490
Parallel - W.115xL.490 |
860054 | 7.00 | On request | €264.00 |
|
|
Wide chisel (AC Epiroc SB150, KM150, JCB HM165Q, CP110H) / 125x700
Cross - W.125 x L.700 |
860697 | 11.00 | On request | €616.00 |
|
SB 200 / 202 / SBC 410 / SBU 220 / TEX 180 H
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 200 / 202 / SBC 410 / SBU 220 / TEX 180 H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC SB200, CP180H, JCB HM265Q, KM200/205) / 600
L.600 |
860712 | 13.00 | On request | €341.00 |
|
|
Bull point (AC SB200, CP180H, JCB HM265Q, KM200/205) / 800
L.800 |
860762 | 19.00 | On request | €464.20 |
|
|
Flat chisel (AC SB200, CP180H, JCB HM265Q, KM200/205) / 65x600
Cross - W.65xL.600 |
860713 | 13.00 | On request | €341.00 |
|
|
Flat chisel (AC SB200, CP180H, JCB HM265Q, KM200/205) / 65x800
Cross - W.65xL.800 |
860743 | 19.00 | On request | €464.20 |
|
|
Wide chisel (AC SB200, CP180H, JCB HM265Q, KM200/205) / 125x650
Cross - W.125xL.650 |
860716 | 16.00 | On request | €510.40 |
|
|
Asphalt cutter (AC SB200, CP180H, JCB HM265Q, KM200/205) / 130x670
Parallel - W.130xL.670 |
860763 | 16.00 | On request | €510.40 |
|
SB 300 / 302 / SBC 610 / 650 / SBU 340
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 300 / 302 / SBC 610 / 650 / SBU 340.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC/Epiroc SB300 / CP290H / JCB HM385Q / KM300) / 800
L.800 |
860701 | 28.00 | On request | €591.80 |
|
|
Flat chisel (AC/Epiroc SB300 / CP290H / JCB HM385Q / KM300) / 80x800
Cross - W.80xL.800 |
860710 | 28.00 | On request | €591.80 |
|
|
Asphalt cutter (AC SB300 / CP290H / JCB HM385Q / KM300) / 180x790
Parallel - W.180xL.790 |
860764 | 28.00 | On request | €814.00 |
|
|
Wide chisel (AC SB300 / CP290H / JCB HM385Q / KM300) / 160x770
Cross - W.160xL.770 |
860709 | 28.00 | On request | €814.00 |
|
|
Bull point (AC/Epiroc SB300 / CP290H / JCB HM385Q / Kubota KM300) / 1000
L.1000 |
864129 | 37.00 | On request | €1,474.45 |
|
SB 450 / 452 / SBC 800 / 850 / TEX 400H
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 450 / 452 / SBC 800 / 850 / TEX 400H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 840
L.840 |
860057 | 41.00 | On request | €778.80 |
|
|
Flat chisel (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 95x840
Cross - W.95xL.840 |
860058 | 41.00 | On request | €778.80 |
|
|
Wide chisel (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 180x800
Cross - W.180xL.800 |
860068 | 41.00 | On request | €1,203.40 |
|
|
Asphalt cutter (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 200x830
Parallel - W.200xL.830 mm |
860074 | 41.00 | On request | €1,203.40 |
|
|
Bull point (AC SB450/TEX400H, KM450/455, JCB HM495Q, CP 400H) / 1200
L.1200 |
864130 | 60.00 | On request | €1,552.80 |
|
SB 552
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 552.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC SB 552) / 100x900
Cross - W.100xL.900 |
860308 | 49.00 | On request | €1,058.20 |
|
|
Bull point (AC SB 552) / 900
L.900 |
860307 | 49.00 | On request | €1,058.20 |
|
|
Wide chisel (AC SB 552) / 200x850
Cross - W.200xL.850 |
860309 | 49.00 | On request | €1,531.20 |
|
SB 702
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 702.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC SB 702) / 1050
L.1050 |
860315 | 64.00 | On request | €1,258.40 |
|
|
Flat chisel (AC SB 702) / 105x1050
Cross - W.105xL.1050 |
860316 | 64.00 | On request | €1,258.40 |
|
|
Wide chisel (AC SB 702) / 200x1000
Cross - W.200xL.1000 |
860317 | 64.00 | On request | €1,619.20 |
|
|
Blunt tool (AC SB 702) / 980
L.980 |
860314 | 64.00 | On request | €1,227.60 |
|
SB 1102
Chisels for hydraulic hammer ATLAS COPCO / EPIROC SB 1102.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB1200, SB1102, HM780, CP RX18) / 1100
L.1100 |
860012 | 87.00 | On request | €1,570.80 |
|
|
Flat chisel (AC MB1200, SB1102, HM780, CP RX18) / 120x1100
Cross - W.120xL.1100 |
860013 | 87.00 | On request | €1,570.80 |
|
|
Blunt tool (AC MB1200, SB1102, HM780, CP RX18) / 1020
L.1020 |
860014 | 87.00 | On request | €1,533.40 |
|
MB 500
Chisels for hydraulic hammer ATLAS COPCO / EPIROC MB 500.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB500, KRUPP HM350V) / 900
L.900 |
860001 | 39.00 | On request | €752.40 |
|
|
Flat chisel (AC MB500, KRUPP HM350V) / 90x900
Cross - W.90xL.900 |
860002 | 39.00 | On request | €752.40 |
|
|
Wide chisel (AC MB500, KRUPP HM350V) / 180x840
Cross - W.180xL.840 |
860003 | 39.00 | On request | €1,060.40 |
|
|
Asphalt cutter (AC MB500, KRUPP HM350V) / 200x880
Parallel - W.200xL.880 |
860004 | 39.00 | On request | €1,060.40 |
|
MB 700 / MB 800
Chisels for hydraulic hammer ATLAS COPCO / EPIROC MB 700 / MB 800.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB700/800, CP750, HM580, HM860Q) / 1000
L.1000 |
860005 | 56.00 | On request | €976.80 |
|
|
Flat chisel (AC MB700/800, CP750, HM580, HM860Q) / 100x1000
Cross - W.100xL.1000 |
860006 | 56.00 | On request | €976.80 |
|
|
Wide chisel (AC MB700/800, CP750, HM580, HM860Q) / 200x950
Cross - W.200xL.950 |
860007 | 56.00 | On request | €1,421.20 |
|
|
Blunt tool (AC MB700/800, CP750, HM580, HM863Q) / 930
L.930 |
860008 | 56.00 | On request | €954.80 |
|
MB 750
Chisels for hydraulic hammer ATLAS COPCO / EPIROC MB 750.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC/Epiroc MB 750)
L.1000 mm |
860319 | 54.00 | On request | €1,060.40 |
|
|
Flat chisel (AC/Epiroc MB 750)
W.100xL.1000 mm |
860320 | 54.00 | On request | €1,060.40 |
|
|
Wide chisel (AC/Epiroc MB 750)
W.200xL.950 mm |
860321 | 54.00 | On request | €1,540.00 |
|
|
Blunt tool (AC/Epiroc MB 750) / 930
L.930 mm |
860322 | 54.00 | On request | €1,034.00 |
|
MB 1000
Chisels for hydraulic hammer ATLAS COPCO / EPIROC MB 1000.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB1000, KRUPP HM680) / 1100
L.1100 |
860009 | 79.00 | On request | €1,570.80 |
|
|
Flat chisel (AC MB1000, KRUPP HM680) / 110x1100
Cross - W.110xL.1100 |
860010 | 79.00 | On request | €1,570.80 |
|
|
Blunt tool (AC MB1000/KRUPP HM680)
L.1020 |
860011 | 79.00 | On request | €1,533.40 |
|
|
Wide chisel (AC MB1000, KRUPP HM680) / 240x1040
Cross - W.240xL.1040 |
860318 | 79.00 | On request | €2,292.40 |
|
MB 1200
Chisels for hydraulic hammer ATLAS COPCO / EPIROC MB 1200.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB1200, SB1102, HM780, CP RX18) / 1100
L.1100 |
860012 | 87.00 | On request | €1,570.80 |
|
|
Flat chisel (AC MB1200, SB1102, HM780, CP RX18) / 120x1100
Cross - W.120xL.1100 |
860013 | 87.00 | On request | €1,570.80 |
|
|
Blunt tool (AC MB1200, SB1102, HM780, CP RX18) / 1020
L.1020 |
860014 | 87.00 | On request | €1,533.40 |
|
MB 1500
Chisels for hydraulic hammer ATLAS COPCO / EPIROC MB 1500.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB 1500, JCB 1570 Q) / 1200
L.1200 |
860360 | 118.00 | On request | €2,246.20 |
|
|
Blunt tool (AC MB 1500, JCB 1570 Q) / 1100
L.1100 |
860362 | 118.00 | On request | €2,191.20 |
|
|
Flat chisel (AC MB 1500, JCB 1570 Q) / 135x1200
Cross - W.135xL.1200 |
860361 | 118.00 | On request | €2,246.20 |
|
MB 1600
Chisels for hydraulic hammer ATLAS COPCO / EPIROC MB 1600.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC MB1600, KRUPP HM950, JCB HM1560Q, CP1650) / 1100
L.1100 |
860015 | 107.00 | On request | €1,898.60 |
|
|
Flat chisel (MB1600, HM950, JCB HM1560Q, CP1650) / 135x1100
Cross - W.135xL.1100 |
860016 | 107.00 | On request | €1,898.60 |
|
|
Blunt tool (MB1600, HM950, JCB HM1560Q, CP1650) / 1000
L.1000 |
860017 | 107.00 | On request | €1,850.20 |
|
|
Percussion buster (MB1600, HM950, JCB HM1560Q, CP1650) / 1200
L.1200 |
860305 | 107.00 | On request | €2,230.80 |
|
MB 1650
Chisels for hydraulic hammer ATLAS COPCO / EPIROC MB 1650.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC/Epiroc MB1650) - 1200
L.1200 |
860369 | 128.00 | On request | On request |
|
|
Flat chisel (AC/Epiroc MB1650)
W.140xL.1200 |
860370 | 128.00 | On request | On request |
|
|
Blunt tool (AC/Epiroc MB1650)
L.1100 |
860371 | 128.00 | On request | On request |
|
MB 1700
Chisels for hydraulic hammer ATLAS COPCO / EPIROC MB 1700.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC MB1700/EC140T, HM1000, CP RX25/26, JCB HM1760Q) / 140x1200
Cross - W.140xL.1200 |
860019 | 128.00 | On request | €2,279.20 |
|
|
Bull point (AC MB1700/EC140T, HM1000, CP RX25/26, JCB HM1760Q) / 1200
L.1200 |
860018 | 128.00 | On request | €2,279.20 |
|
|
Blunt tool (AC MB1700/EC140T, HM1000, CP RX25/26, JCB HM1760Q) / 1100
L.1100 |
860020 | 128.00 | On request | €2,219.80 |
|
HB 2000
Chisels for hydraulic hammer ATLAS COPCO / EPIROC HB 2000.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HB 2000)
L.1230 |
860363 | 141.00 | On request | €2,849.00 |
|
|
Flat chisel (AC HB 2000)
W.145xL.1230 |
860364 | 141.00 | On request | €2,849.00 |
|
HB 2200
Chisels for hydraulic hammer ATLAS COPCO / EPIROC HB 2200.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC HB2200/EC 150T, HM1300, JCB HM2460Q) / 150x1300
Cross - W.150xL.1300 |
860022 | 160.00 | On request | €2,890.80 |
|
|
Bull point (AC HB2200/EC 150T, HM1300, JCB HM2460Q) / 1300
L.1300 |
860021 | 160.00 | On request | €2,890.80 |
|
|
Blunt tool (AC HB2200/EC 150T, HM1300, JCB HM2460Q) / 1200
L.1200 |
860023 | 160.00 | On request | €2,820.40 |
|
HB 2500
Chisels for hydraulic hammer ATLAS COPCO / EPIROC HB 2500.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HB2500/EC155T, CP RX38) / 1300
L.1300 |
860365 | 175.00 | On request | €3,495.80 |
|
|
Blunt tool (AC HB2500/EC155T, CP RX38) / 1200
L.1200 |
860367 | 175.00 | On request | €3,410.00 |
|
|
Flat chisel (AC HB2500/EC155T, CP RX38) / 155x1300
Cross - W.155xL.1300 |
860366 | 175.00 | On request | €3,495.80 |
|
HB 3000 / HB 3100
Chisels for hydraulic hammer ATLAS COPCO / EPIROC HB 3000 / HB 3100.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC HB3000/3100, HM2100, JCB HM3060Q) / 165x1350
Cross - W.165xL.1350 |
860025 | 197.00 | On request | €4,602.40 |
|
|
Bull point (AC HB3000/3100, HM2100, JCB HM3060Q) / 1350
L.1350 |
860024 | 197.00 | On request | €4,602.40 |
|
|
Blunt tool (AC HB3000/3100, HM2100, JCB HM3060Q) / 1250
L.1250 |
860026 | 197.00 | On request | €4,488.00 |
|
HB 3600
Chisels for hydraulic hammer ATLAS COPCO / EPIROC HB 3600.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC/Epiroc HB3600) - 1450
L.1450 |
864131 | 230.00 | On request | €3,983.77 |
|
HB 4100 / HB 4200
Chisels for hydraulic hammer ATLAS COPCO / EPIROC HB 4100 / HB 4200.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HB4100/4200/EC180T, HM2200, JCB HM4160Q) / 1700
L.1700 |
860325 | 308.00 | On request | €6,056.60 |
|
|
Flat chisel (AC HB4100/4200/EC180T, HM2200, JCB HM4160Q) / 180x1700
Cross - W.180xL.1700 |
860326 | 308.00 | On request | €6,056.60 |
|
|
Blunt tool (AC HB4100/4200/EC180T, HM2200, JCB HM4160Q) / 1600
L.1600 |
860327 | 308.00 | On request | €5,904.80 |
|
TEX 250 H
Chisels for hydraulic hammer ATLAS COPCO TEX 250 H.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (ATLAS COPCO TEX250H / CP250 H1)
L.800 |
860055 | 27.00 | On request | €596.20 |
|
|
Flat chisel (ATLAS COPCO TEX250H / CP250 H1)
W.80xL.800 |
860056 | 27.00 | On request | €596.20 |
|
|
Wide chisel (Atlas Copco TEX 250H / CP250 H1)
W.160xL.770 |
860067 | 27.00 | On request | €833.80 |
|
|
Asphalt cutter (Atlas Copco TEX 250H / CP250 H1)
W.180xL.790 |
860368 | 27.00 | On request | €833.80 |
|
HBC 1100 / 1700HD / TEX 600-900H
Chisels for hydraulic hammer ATLAS COPCO HBC 1100 / 1700 HD / TEX 600-900 H.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HBC1100/1700HD/TEX600-900H / CP600-900H) / 900
L.900 |
860059 | 54.00 | On request | €1,031.80 |
|
|
Flat chisel (AC HBC1100/1700HD/TEX600-900H / CP600-900H) / 105x900
Cross - W.105xL.900 |
860060 | 54.00 | On request | €1,031.80 |
|
HBC 2500 / TEX 1400H
Chisels for hydraulic hammer ATLAS COPCO HBC 2500 / TEX 1400 H.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HBC 2500/TEX 1400H, CP 1400H/1550) / 1100
L.1100 |
860061 | 95.00 | On request | €1,852.40 |
|
|
Flat chisel (AC HBC 2500/TEX 1400H, CP 1400H/1550) / 125x1100
Cross - W.125xL.1100 |
860062 | 95.00 | On request | €1,852.40 |
|
|
Blunt tool (AC HBC 2500/TEX 1400H, CP 1400H/1550)
L.1020 |
860063 | 95.00 | On request | €1,189.32 |
|
HBC 4000 / TEX 1800 / 2000H
Chisels for hydraulic hammer ATLAS COPCO HBC 4000 / TEX 1800 / 2000 H.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HBC 4000 / TEX, CP 1800H/2000H) / 1100
L.1100 |
860064 | 108.00 | On request | €2,008.60 |
|
|
Flat chisel (AC HBC 4000 / TEX, CP 1800H/2000H) / 135x1100
Cross - W.135xL.1100 |
860065 | 108.00 | On request | €1,320.34 |
|
|
Blunt tool (AC HBC 4000 / TEX, CP 1800H/2000H) / 1000
L.1000 |
860066 | 108.00 | On request | €1,962.40 |
|
PB 110 / AT 20
Chisels for hydraulic hammer ATLAS COPCO PB 110 / AT 20. Is similar to Serie Atlas Copco/Epiroc EC 40 T etc.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC PB110, EC 40T, CP100/RX2) / 410
L.410 |
860027 | 4.00 | On request | €123.20 |
|
|
Flat chisel (AC PB110, EC 40T, CP100/RX2) / 42x410
Cross - W.42xL.410 |
860028 | 4.00 | On request | €123.20 |
|
|
Wide chisel (AC PB110, EC 40T, CP100/RX2) / 120x370
Cross - W.120xL.370 |
860029 | 4.00 | On request | €169.40 |
|
|
Asphalt cutter (AC PB110, EC 40T, CP100/RX2) / 100x380
Parallel - W.100xL.380 |
860030 | 4.00 | On request | €169.40 |
|
|
Bull point (AC PB110, EC 40T, CP100/RX2) / 500
L.500 |
860031 | 5.00 | On request | €156.20 |
|
PB 160 / AT 70
Chisels for hydraulic hammer ATLAS COPCO PB 160 / AT 70.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Asphalt cutter (AC EC50T/PB160/AT70, CP150/RX3) / 115x510
Parallel - W.115xL.510 |
860035 | 8.00 | On request | €316.80 |
|
|
Wide chisel (AC EC50T/PB160/AT70, CP150/RX3) / 140x500
Quer - B.140xL.500 |
860034 | 8.00 | On request | €316.80 |
|
|
Flat chisel (AC EC50T/PB160/AT70, CP150/RX3) / 52x530
Cross - W.52xL.530 |
860033 | 8.00 | On request | €226.60 |
|
|
Bull point (AC EC50T/PB160/AT70, CP150/RX3) / 530
L.530 |
860032 | 8.00 | On request | €226.60 |
|
|
Bull point (AC EC50T/PB160/AT70, CP150/RX3) / 680
L.680 |
860041 | 11.00 | On request | €294.80 |
|
PB 210 / AT 120
Chisels for hydraulic hammer ATLAS COPCO PB 210 / AT 120.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Asphalt cutter (AC PB210/AT210, EC 60T, CP200/RX4)
W.130xL.570 |
860040 | 12.00 | On request | €437.80 |
|
|
Wide chisel (AC PB210/AT210, EC 60T, CP200/RX4)
W.150xL.550 |
860039 | 12.00 | On request | €437.80 |
|
|
Flat chisel (AC PB210/AT210, EC 60T, CP200/RX4)
W.62xL.600 |
860038 | 12.00 | On request | €325.60 |
|
|
Bull point (AC PB210/AT210, EC 60T, CP200/RX4)
L.600 |
860037 | 12.00 | On request | €325.60 |
|
|
Bull point (AC PB210/AT210, EC 60T, CP200/RX4)
L.750 |
860046 | 17.00 | On request | €424.60 |
|
PB 310 / AT 170
Chisels for hydraulic hammer ATLAS COPCO PB 310 / AT 170.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC PB310/AT170, EC 70T, CP300/RX6)
L.740 |
860042 | 20.00 | On request | €433.40 |
|
|
Flat chisel (AC PB310/AT170, EC 70T, CP300/RX6)
W.70xL.740 |
860043 | 20.00 | On request | €433.40 |
|
|
Wide chisel (AC PB310/AT170, EC 70T, CP300/RX6)
W.150xL.690 |
860044 | 20.00 | On request | €572.00 |
|
|
Asphalt cutter (AC PB310/AT170, EC 70T, CP300/RX6)
W.150xL.720 |
860045 | 20.00 | On request | €572.00 |
|
PB 420 / 530 / AT 220
Chisels for hydraulic hammer ATLAS COPCO PB 420 / 530 / AT 220.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Asphalt cutter (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 150x790
Parallel - W.150xL.790 |
860050 | 29.00 | On request | €761.20 |
|
|
Wide chisel (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 160x760
Cross - W.160xL.760 |
860049 | 29.00 | On request | €761.20 |
|
|
Flat chisel (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 80x800
Cross - W.80xL.800 |
860048 | 29.00 | On request | €576.40 |
|
|
Bull point (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 800
L.800 |
860047 | 29.00 | On request | €576.40 |
|
EC 40 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 40 T.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC PB110, EC 40T, CP100/RX2) / 410
L.410 |
860027 | 4.00 | On request | €123.20 |
|
|
Flat chisel (AC PB110, EC 40T, CP100/RX2) / 42x410
Cross - W.42xL.410 |
860028 | 4.00 | On request | €123.20 |
|
|
Wide chisel (AC PB110, EC 40T, CP100/RX2) / 120x370
Cross - W.120xL.370 |
860029 | 4.00 | On request | €169.40 |
|
|
Asphalt cutter (AC PB110, EC 40T, CP100/RX2) / 100x380
Parallel - W.100xL.380 |
860030 | 4.00 | On request | €169.40 |
|
|
Bull point (AC PB110, EC 40T, CP100/RX2) / 500
L.500 |
860031 | 5.00 | On request | €156.20 |
|
EC 50 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 50 T.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Asphalt cutter (AC EC50T/PB160/AT70, CP150/RX3) / 115x510
Parallel - W.115xL.510 |
860035 | 8.00 | On request | €316.80 |
|
|
Wide chisel (AC EC50T/PB160/AT70, CP150/RX3) / 140x500
Quer - B.140xL.500 |
860034 | 8.00 | On request | €316.80 |
|
|
Flat chisel (AC EC50T/PB160/AT70, CP150/RX3) / 52x530
Cross - W.52xL.530 |
860033 | 8.00 | On request | €226.60 |
|
|
Bull point (AC EC50T/PB160/AT70, CP150/RX3) / 530
L.530 |
860032 | 8.00 | On request | €226.60 |
|
|
Bull point (AC EC50T/PB160/AT70, CP150/RX3) / 680
L.680 |
860041 | 11.00 | On request | €294.80 |
|
EC 60 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 60 T.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Asphalt cutter (AC PB210/AT210, EC 60T, CP200/RX4)
W.130xL.570 |
860040 | 12.00 | On request | €437.80 |
|
|
Wide chisel (AC PB210/AT210, EC 60T, CP200/RX4)
W.150xL.550 |
860039 | 12.00 | On request | €437.80 |
|
|
Flat chisel (AC PB210/AT210, EC 60T, CP200/RX4)
W.62xL.600 |
860038 | 12.00 | On request | €325.60 |
|
|
Bull point (AC PB210/AT210, EC 60T, CP200/RX4)
L.600 |
860037 | 12.00 | On request | €325.60 |
|
|
Bull point (AC PB210/AT210, EC 60T, CP200/RX4)
L.750 |
860046 | 17.00 | On request | €424.60 |
|
EC 70 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 70 T.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC PB310/AT170, EC 70T, CP300/RX6)
L.740 |
860042 | 20.00 | On request | €433.40 |
|
|
Flat chisel (AC PB310/AT170, EC 70T, CP300/RX6)
W.70xL.740 |
860043 | 20.00 | On request | €433.40 |
|
|
Wide chisel (AC PB310/AT170, EC 70T, CP300/RX6)
W.150xL.690 |
860044 | 20.00 | On request | €572.00 |
|
|
Asphalt cutter (AC PB310/AT170, EC 70T, CP300/RX6)
W.150xL.720 |
860045 | 20.00 | On request | €572.00 |
|
EC 80 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 80 T.
The cutting edge of the chisel is cross to driving direction of the excavator,
with the exception of the Asphalt cutter,
this one stands parallel to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Asphalt cutter (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 150x790
Parallel - W.150xL.790 |
860050 | 29.00 | On request | €761.20 |
|
|
Wide chisel (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 160x760
Cross - W.160xL.760 |
860049 | 29.00 | On request | €761.20 |
|
|
Flat chisel (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 80x800
Cross - W.80xL.800 |
860048 | 29.00 | On request | €576.40 |
|
|
Bull point (AC PB420/530/AT220, CP 400/550/RX8/11, HM220/230) / 800
L.800 |
860047 | 29.00 | On request | €576.40 |
|
EC 100 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 100 T.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC/Epiroc EC100T) - 900
L.900 |
864134 | 50.00 | On request | On request |
|
|
Flat chisel (AC/Epiroc EC100T)
W.100xL.900 |
864135 | 50.00 | On request | On request |
|
EC 135 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 135 T.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC/Epiroc EC135T) - 1200
L.1200 |
864137 | 119.00 | On request | On request |
|
|
Wide chisel (AC/Epiroc EC135T)
B.135xL.1200 |
864138 | 119.00 | On request | On request |
|
EC 140 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 140 T.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC MB1700/EC140T, HM1000, CP RX25/26, JCB HM1760Q) / 140x1200
Cross - W.140xL.1200 |
860019 | 128.00 | On request | €2,279.20 |
|
|
Bull point (AC MB1700/EC140T, HM1000, CP RX25/26, JCB HM1760Q) / 1200
L.1200 |
860018 | 128.00 | On request | €2,279.20 |
|
|
Blunt tool (AC MB1700/EC140T, HM1000, CP RX25/26, JCB HM1760Q) / 1100
L.1100 |
860020 | 128.00 | On request | €2,219.80 |
|
EC 150 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 150 T.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC HB2200/EC 150T, HM1300, JCB HM2460Q) / 150x1300
Cross - W.150xL.1300 |
860022 | 160.00 | On request | €2,890.80 |
|
|
Bull point (AC HB2200/EC 150T, HM1300, JCB HM2460Q) / 1300
L.1300 |
860021 | 160.00 | On request | €2,890.80 |
|
|
Blunt tool (AC HB2200/EC 150T, HM1300, JCB HM2460Q) / 1200
L.1200 |
860023 | 160.00 | On request | €2,820.40 |
|
EC 155 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 155 T.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HB2500/EC155T, CP RX38) / 1300
L.1300 |
860365 | 175.00 | On request | €3,495.80 |
|
|
Blunt tool (AC HB2500/EC155T, CP RX38) / 1200
L.1200 |
860367 | 175.00 | On request | €3,410.00 |
|
|
Flat chisel (AC HB2500/EC155T, CP RX38) / 155x1300
Cross - W.155xL.1300 |
860366 | 175.00 | On request | €3,495.80 |
|
EC 165 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 165 T.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Flat chisel (AC HB3000/3100, HM2100, JCB HM3060Q) / 165x1350
Cross - W.165xL.1350 |
860025 | 197.00 | On request | €4,602.40 |
|
|
Bull point (AC HB3000/3100, HM2100, JCB HM3060Q) / 1350
L.1350 |
860024 | 197.00 | On request | €4,602.40 |
|
|
Blunt tool (AC HB3000/3100, HM2100, JCB HM3060Q) / 1250
L.1250 |
860026 | 197.00 | On request | €4,488.00 |
|
EC 180 T
Chisels for hydraulic hammer ATLAS COPCO / EPIROC EC 180 T.
The cutting edge of the chisel is cross to driving direction of the excavator.
Product Name1 | Art. nr. | Weight | Delivery Time | Price | ||
---|---|---|---|---|---|---|
Bull point (AC HB4100/4200/EC180T, HM2200, JCB HM4160Q) / 1700
L.1700 |
860325 | 308.00 | On request | €6,056.60 |
|
|
Flat chisel (AC HB4100/4200/EC180T, HM2200, JCB HM4160Q) / 180x1700
Cross - W.180xL.1700 |
860326 | 308.00 | On request | €6,056.60 |
|
|
Blunt tool (AC HB4100/4200/EC180T, HM2200, JCB HM4160Q) / 1600
L.1600 |
860327 | 308.00 | On request | €5,904.80 |
|